Our Services
Duct & Vent CleaningFrom Free Estimates
›
AC MaintenancePackages from $99
›
Indoor Air QualityThermostats, UV Lights & More
›
Quick Links
See black spots around your vents? Smell something musty when the AC kicks on? Your family could be breathing mold spores every time the system runs. Mold thrives inside Miami ductwork -- humidity, condensation, and organic dust create the perfect breeding ground. We find it, contain it, remove it, and prevent it from coming back. Free inspection across Miami-Dade and Broward County.
Your air duct system is dark, damp, and full of organic dust -- the three things mold needs to colonize. In Miami, the conditions are worse than anywhere else in the country.
Mold in air ducts looks like black, green, or dark gray spots on the inside surface of ductwork, around register openings, and on the evaporator coil. In early stages, you might only see faint discoloration around vent edges. In advanced cases, fuzzy colonies spread across entire duct sections.
Why Miami ducts are ground zero for mold:
The moment mold establishes inside your ducts, every AC cycle pushes spores into every room. You cannot clean mold out of ducts with household products -- the colony is inside surfaces you cannot reach without professional HEPA equipment and antimicrobial treatment.
When mold lives in your ductwork, the AC blower becomes a mold spore distribution system. Every cycle pushes contaminated air into bedrooms, kitchens, and nurseries.
Mold spores inhaled daily irritate lung tissue, causing chronic coughing, wheezing, shortness of breath, and recurring bronchitis. People with asthma experience more frequent and more severe attacks.
Severe RiskInfants and young children breathe faster than adults, inhaling more spores per pound of body weight. Developing lungs are especially vulnerable. Studies link early mold exposure to childhood asthma that persists into adulthood.
Severe Risk -- BabiesMold triggers histamine responses -- sneezing, runny nose, itchy eyes, skin rashes, and sinus congestion that never goes away as long as the AC runs. Allergy medication treats the symptom, not the source.
Chronic ExposureCertain black mold species like Stachybotrys produce mycotoxins -- toxic compounds that become airborne and can cause neurological symptoms, chronic fatigue, immune suppression, and severe respiratory distress with prolonged exposure.
Severe -- ToxicDogs and cats breathe the same air. Pets exposed to mold spores develop respiratory infections, skin irritation, lethargy, and appetite loss. Small animals are at higher risk because they live closer to floor-level vents.
High Risk -- PetsSeniors, transplant recipients, chemotherapy patients, and anyone with a weakened immune system face serious infection risk from airborne mold spores. What causes sneezing in a healthy adult can cause hospitalization in a vulnerable person.
Severe -- VulnerableEvery hour your AC runs with mold in the ducts, spores circulate through your home.
The longer mold stays, the deeper it grows, the more expensive removal becomes, and the greater the health risk to everyone inside.
Book My Free Mold Inspection NowMold often hides deep inside ductwork where you cannot see it. But it leaves clues. If you recognize any of these, call for a free camera inspection.
The most common first sign. You notice a damp, earthy, or mildew odor that appears when the AC cycles on and fades when it shuts off. The blower is pushing air across mold colonies and carrying that smell directly into your rooms.
"Every time the AC kicks on, the whole house smells like a wet basement."
Dark spots, streaks, or discoloration on or around your ceiling and wall vents indicate mold is growing at the register boot where cold air meets warm humid air. What you see at the register is usually just the edge of a colony that extends deeper into the ductwork.
"I keep wiping the vents clean but the dark spots come back within days."
Family members experience sneezing, runny nose, itchy eyes, or sinus congestion only when inside the home. Symptoms improve when they leave and return when they come back. This pattern strongly suggests an indoor air quality problem, and mold in the HVAC system is the most common cause in South Florida.
"My allergies are fine at work but terrible at home -- I thought it was the dog."
Water droplets forming on metal vent registers mean the humidity level around that duct connection is high enough for mold growth. Condensation indicates poor insulation or a duct leak pulling humid attic air into the supply stream. Wherever there is condensation, mold follows.
"The vent in the bathroom is always sweating and there is water dripping down the wall."
Recurring respiratory infections, persistent coughs that do not respond to medication, headaches that come and go, and fatigue without explanation. When multiple household members develop similar symptoms simultaneously, the HVAC system is a common shared vector. A free duct inspection rules it out or confirms it.
"Both kids had bronchitis twice this year and the pediatrician asked about our AC."
We do not just spray and wipe. Our process is systematic: find it, contain it, extract it, treat it, verify it, and prevent it. Every step documented with photos.
Our licensed technician inspects every accessible duct run with a high-resolution camera. We locate every mold colony, photograph it, measure the contamination area, and show you exactly what we found on a screen before recommending any work.
Free -- No ObligationBefore touching a single duct, we seal off contaminated sections with containment barriers and establish negative air pressure using HEPA-filtered machines. This prevents mold spores from escaping into your living space during removal -- the most critical step most companies skip.
Prevents Cross-ContaminationIndustrial HEPA vacuum systems extract loose mold spores, contaminated dust, and debris from inside the ductwork. HEPA filters capture 99.97% of particles down to 0.3 microns -- mold spores are typically 1 to 20 microns, so nothing escapes the filter.
99.97% Capture RateRotating brush systems and specialized agitation tools physically scrub mold colonies from duct interior surfaces, register boots, and plenums. Vacuuming alone does not remove mold that has rooted into duct material -- mechanical scrubbing dislodges the colonies so the antimicrobial can reach the surface.
We fog the entire duct system with an EPA-registered antimicrobial solution that kills remaining spores on contact and leaves a protective residual coating on duct surfaces to inhibit regrowth. The fog reaches every corner, bend, and connection inside the ductwork.
Kills + Prevents RegrowthAfter treatment, we re-inspect every duct section with the camera to confirm all visible mold has been eliminated. You receive before-and-after photos documenting the condition of your ductwork pre-treatment and post-treatment.
Before/After DocumentationWe identify the root cause of your mold growth -- condensation from poor insulation, humidity from an oversized AC, clogged drain lines, or lack of UV protection -- and give you a written prevention plan. We recommend UV-C germicidal light installation at the coil to continuously kill spores before they colonize.
Long-Term ProtectionMiami's average relative humidity exceeds 75% year-round. When your AC cools air inside the ducts to 55-60 degrees while attic temperatures reach 140 degrees, condensation forms on duct surfaces constantly. Add organic dust as a food source and zero UV light exposure, and mold colonies establish within 24 to 48 hours of the first moisture event. Hurricane season compounds the problem -- storm-driven moisture intrusion saturates duct insulation and creates explosive mold growth in homes with older ductwork or poor attic ventilation.
Removing mold is step one. Keeping it gone requires addressing the root causes. Here are the five most effective prevention strategies for Miami homes.
UV-C lights mounted at the evaporator coil and return plenum kill mold spores, bacteria, and viruses continuously as air circulates. The single most effective long-term mold prevention investment for any HVAC system. Learn about UV light installation.
Professional duct cleaning removes the organic dust, pet dander, and debris that mold feeds on. Without a food source, spores cannot establish colonies even if humidity spikes.
Keep indoor humidity below 60% using a dehumidifier if needed. An oversized AC system cools fast but does not run long enough to dehumidify properly -- if your system short-cycles, have it evaluated during your free inspection.
A clogged filter restricts airflow, causes the coil to freeze and thaw, and creates excess moisture. Replace filters every 30 to 60 days in Miami. Use MERV 8 to 11 filters -- high enough to catch spores, low enough to maintain airflow.
A properly maintained AC system dehumidifies as it cools. Dirty coils, clogged drain lines, and low refrigerant all reduce dehumidification capacity and create the moisture that mold needs. Regular AC maintenance addresses these issues before mold takes hold. We check drain lines, coil condition, refrigerant levels, and insulation integrity during every maintenance visit.
These terms get used interchangeably, but they mean different things. Understanding the difference helps you avoid paying for services you do not need.
Physically extracting mold colonies from a specific location -- in this case, the inside of your air duct system.
The broader process of treating mold contamination throughout an entire area -- walls, ceilings, crawl spaces, attics, and ductwork together.
We perform both. If mold is contained within your duct system, duct mold removal solves the problem at lower cost. If our inspection reveals mold has spread into walls, ceilings, or the attic structure, we provide full mold remediation service to treat the entire affected area. Our free camera inspection tells you exactly which service you need.
Not every HVAC company knows how to handle mold safely. Improper removal spreads spores and makes the problem worse. Here is why our process works.
We set up negative air pressure with HEPA-filtered machines before disturbing any mold colony. Most companies skip containment -- that spreads spores into every room. We capture the contamination at the source.
Florida HVAC License #CAC1817115. Fully insured. BBB A+ Accredited. EPA 608 certified. Background-checked, uniformed technicians who arrive in branded trucks with all equipment on board.
Every job includes camera-documented before-and-after photos so you can see the mold that was removed and verify the results yourself. Useful for insurance claims, property sales, and peace of mind.
We do not just remove mold -- we treat surfaces with EPA-registered antimicrobial and recommend UV-C light installation to prevent regrowth. Other companies clean and leave. We clean and protect.
Over 20 years of HVAC experience across Miami-Dade and Broward County. We have seen every type of mold problem in every type of home -- from 1960s coral rock houses to new construction high-rises.
Our mold inspection is free. We show you what we find, explain your options, give you an exact price, and let you decide. No pressure, no surprise charges, no work without your approval.
"We had a musty smell for months and could not figure out where it was coming from. They did a camera inspection and found mold colonies throughout the ductwork. After the HEPA removal and antimicrobial treatment, the smell was completely gone. Should have called sooner."
"My daughter kept getting sick and the doctor suggested checking the AC ducts. These guys found black mold in three duct sections and around the coil. They contained everything, cleaned it out, and installed a UV light. No more respiratory issues since the treatment."
"After Hurricane Irma our ducts were full of mold from water intrusion in the attic. The other company wanted to replace all the ductwork. Air Duct Cleaning Miami saved the existing ducts, treated everything with antimicrobial, and the air quality test came back clean. Saved us thousands."
Mold removal from ducts is often part of a larger indoor air quality solution. These related services address root causes and prevent future problems.
Full mold remediation for walls, attics, and entire structures beyond just ductwork.
Germicidal UV-C lights kill mold spores continuously inside your HVAC system.
Remove dust, debris, and organic matter that feeds mold colonies inside your ducts.
We remove mold from ductwork in every city across both counties. High humidity makes the entire region vulnerable -- no neighborhood is exempt.
Don't see your city? Call (305) 607-3244 -- we likely serve your area. View all HVAC service areas.
Free camera inspection. We find the mold, photograph it, price the removal, and eliminate it. Same-day service across Miami-Dade and Broward County. Licensed. Insured. BBB A+ Rated.
